- Manuals
- Brands
- Mighty Mule Manuals
- Gate Opener
- MM462
- Installation manual
Hide thumbs
-
- Contents
- Table of Contents
- Troubleshooting
- Bookmarks
Table of Contents
-
Table of Contents
-
Please Read this First
-
Required Safety Precautions for Gates
-
Technical Specifications
-
Before You Begin
-
Solar Panel and Gate Activity Chart
-
Parts List - Opener and Mounting Hardware
-
Tools and Materials
-
Installation Overview for Pull-To-Open Gates
-
Installation of the First Gate Opener
-
Install Post Bracket Assembly and Gate Bracket
-
Attach Opener Arm
-
Install the Closed Position Stop Plates
-
Mount the Battery Box and Control Box
-
Connecting the Battery
-
Remove the Control Box Cover
-
Connect Opener Power Cables
-
Connect the Transformer
-
Set the Closed Position Limit
-
Adjust the Stall Force Setting
-
Set Auto-Close Time
-
Personalize Your Transmitter Setting
-
Push-To-Open Installation Instructions
-
Solar Panel Instructions
-
Connecting Accessories and Safety Devices
-
Troubleshooting Guide
-
Gate and Opener Maintenance
-
Warranty Repair
-
Accessories
Advertisem*nt
Quick Links
- 1 Set the Closed Position Limit
- 2 Personalize Your Transmitter Setting
- 3 Troubleshooting Guide
- Download this manual
Receiver
Control Box
Post Bracket
120 Volt indoor
Transformer
(surge protector
not supplied)
Run 1000' (max.) of low
voltage wire to control
box from transformer
(wire not included).
This product meets and exceeds the requirements of UL325 6th Edition, 2016, the standard
which regulates gate operator safety.
For 24 hour/day, 7 day/week Technical Service visit http://support.gtoinc.com
For more information on Mighty Mule's full line of Automatic Gate Operators and Access Controls visit
Mighty Mule® is the retail brand of GTO Access Systems, LLC
Printed in China for GTO Access Systems, LLC.
Installation Manual
Gate Swings Evenly and Freely
Hung Firmly and Plumb
First Gate Opener
Horizontal Support
Power Cable
PVC conduit (not included)
to protect wire from lawn
mowers and weed eaters.
Example of finished installation
(installations vary slightly on different types of gates)
GTO Sales: 800-543-4283 • Fax 850-575-8912
GTO Technical Service 800-543-1236
3121 Hartsfield Road • Tallahassee, FL 32303
MM462
Warning Sign
Gate Bracket
Horizontal Support
PVC conduit (not included)
to run second opener power
cable under driveway.
www.mightymule.com
Second Gate Opener
Gate Bracket
Fence Post Set in Concrete
ACCESS SYSTEMS, LLC
Copyright
©
2016 GTO Access Systems, LLC
Document Number: R46208 REV A (04.27.16)
Post Bracket
Table ofContents
Advertisem*nt
Table of Contents
Related Manuals for Mighty Mule MM462
-
Gate Opener Mighty Mule Mighty Mule MM600 ET-PRO Installation Manual
Single gate opener system (42 pages)
-
Gate Opener Mighty Mule Mighty Mule Installation Manual
Automatic gate opener system for single swing gates only (42 pages)
-
Gate Opener Mighty Mule MM362-D Installation Manual
(36 pages)
-
Gate Opener Mighty Mule MM362 Installation Manual
(41 pages)
-
Gate Opener Mighty Mule MM562 Installation Manual
(46 pages)
-
Gate Opener Mighty Mule MM660 Installation Manual
(45 pages)
-
Gate Opener Mighty Mule MM360 Installation Manual
(46 pages)
-
Gate Opener Mighty Mule MM260 Installation Manual
(36 pages)
-
Gate Opener Mighty Mule MM571W Installation Manual
(56 pages)
-
Gate Opener Mighty Mule MM571W Planning Manual
(2 pages)
-
Gate Opener Mighty Mule MM272 Installation Manual
(44 pages)
-
Gate Opener Mighty Mule MMK200 Installation Instructions
Digital keypad for automatic gate operators (2 pages)
-
Gate Opener Mighty Mule MM202 Series Installation Manual
(40 pages)
-
Gate Opener Mighty Mule MMS915 Installation Manual
Wireless connectivity system (3 pages)
-
Gate Opener Mighty Mule GTO PRO MM371W Instruction Manual
Wireless vehicle sensor (12 pages)
-
Gate Opener Mighty Mule 350 Installation Manual
Single gate opener (44 pages)
Summary of Contents for Mighty Mule MM462
- Page 1 GTO Technical Service 800-543-1236 For 24 hour/day, 7 day/week Technical Service visit http://support.gtoinc.com For more information on Mighty Mule’s full line of Automatic Gate Operators and Access Controls visit www.mightymule.com Mighty Mule® is the retail brand of GTO Access Systems, LLC 3121 Hartsfield Road •...
- Page 2 Product Usage The Mighty Mule Gate Operator meets all of the safety requirements of a Class I Residential Vehicular Gate Operator and is intended for use solely with vehicular swing gates in single-family residential applications that meet the Class I category listed in the table below.
-
Page 3: Table Of Contents
Personalize Your Transmitter Setting ................ 18 Push-To-Open Installation Instructions ............... 19 Solar Panel Instructions ....................21 Connecting Accessories and Safety Devices ............. 22 Troubleshooting Guide ....................24 Gate and Opener Maintenance .................. 25 Warranty Repair ......................25 Accessories ......................... 26 Mighty Mule FM462 Installation Instructions... -
Page 4: Please Read This First
• Swing gates longer than 18 feet or weighing than 850 pounds (please see Technical Specifications more than 850 pounds on page 9). The Mighty Mule Gate Operator can be • Slide gates used on vinyl, aluminum, chain link, farm tube, and •... - Page 5 Because Mighty Mule automatic gate operators are only part of the total gate operating system, it is the responsibility of the installer or end user to ensure that the total system is safe for its intended use.
- Page 6 ZONE 1 ZONE 2 ZONE 2 ZONE 5 ZONE 5 ZONE 3 ZONE 3 Driveway ZONE 4 ZONE 4 Gate in the Gate in the Open Position Entrapment Zones for a Open Position Pull-To-Open Application Mighty Mule FM462 Installation Instructions...
- Page 7 6. Secure outdoor or easily accessed gate operator provide additional protection against entrapment. controls in order to prohibit unauthorized use of the gate. Pull-To-Open Application Moving Gate Moving Gate Area Area Driveway NEVER INSTALL any control device within gray area Mighty Mule FM462 Installation Instructions...
- Page 8 If any of these instructions and still do not understand how to signs or warning decals becomes damaged, disconnect the operator, contact the Mighty Mule illegible, or missing, replace them immediately. Service Department.
- Page 9 Entrapment Alarm The Mighty Mule 562 Automatic Gate Operator is designed to stop and reverse the gate when the gate comes in contact with an obstruction. Additionally, these operators are equipped with an audio entrapment alarm which will activate if the unit obstructs twice while opening or closing.
- Page 10 Installing Warning SIgns and Pedestrian Gates Warning signs alert people of automatic gate operation and are required when installing Mighty Mule Automatic Gate Operators. A minimum of two WARNING SIGNS must be installed in the area of the gate. Each sign is to be visible by persons located on the side of the gate on which the placard is installed.
-
Page 11: Required Safety Precautions For Gates
DC Swing Gate Operator P/N MM462 Conforms to UL STD 325 Class I Vehicular Gate 9901178 MM462-0000000 S/N: MMDDYY GTO Access Systems, LLC - Tallahassee, Florida USA Product identification label (2) installed under rear mount of each arm Mighty Mule FM462 Installation Instructions... -
Page 12: Technical Specifications
_____________________________________ OPERATIONAL CAPACITY _____________________________________ • The Gate Capacity Chart shows approximate cycles, per day, you can expect from the Mighty Mule Automatic Gate Opener when powered with a transformer. Actual cycles may vary slightly depending upon the type and condition of gate and installation. -
Page 13: Before You Begin
OR solar panel is connected to the control board using low voltage, 16 gauge, dual conductor, stranded, direct burial wire [RB509] (page 26). • All low voltage wire used with the Mighty Mule Gate Opener must be 16 gauge dual conductor, stranded, direct burial wire. •... - Page 14 2. Check Direction of Gate Swing The Mighty Mule is designed for PULL-TO-OPEN installations. PUSH-TO-OPEN installations require two Push-To-Open brackets [FM148]. Push-to-Open Installation Instructions begin on page 19. Your Property Your Property Pull-To-Open Push-To-Open (arm retracts to open) (arm extends to open) 3.
-
Page 15: Parts List - Opener And Mounting Hardware
3/8" x 2-3/4" Bolt (4) 5/16" Washer (2) 3/8" x 1-1/2" Bolt (2) 3/8" Lock Nut (10) 5/16" x 1-1/2" Bolt (2) 5/16" Lock Nut (2) 3/8" x 1-1/2" Clevis Pin (4) 3/8" Bushings (2) Hairpin Clip (4) Mighty Mule FM462 Installation Instructions... -
Page 16: Tools And Materials
Weather proof outlet is required if transformer is plugged into outside outlet. (Page 16) • Some types of installations require U-Bolts for closed position stop plate. (Page 11) • A low profile ground stop is required for dual gates when using the Mighty Mule gate lock. (Page 11) Mighty Mule FM462 Installation Instructions... -
Page 17: Installation Overview For Pull-To-Open Gates
If the gate post is larger than 6" the Post Pivot Bracket can be removed and the center hole of the Post Bracket can be the mounting point for the gate opener. Center hole of post bracket Mighty Mule FM462 Installation Instructions... -
Page 18: Installation Of The First Gate Opener
Muffler Clamp for Gate Bracket Thin Walled Tube Gate 1" x 6" Wood Wood or Metal Reinforcement Reinforcement Gate Bracket Gate Bracket Wood or Metal Reinforcement Panel (not supplied) Gate 1" x 6" Wood Reinforcement Mighty Mule FM462 Installation Instructions... -
Page 19: Install Post Bracket Assembly And Gate Bracket
While holding the opener level, use C-clamps to temporarily secure the post bracket assembly and gate bracket to the post and gate. Post Bracket Assembly Gate in Open Position Opener Arm Fully Retracted Level Opener Gate Bracket Fence Post Mighty Mule FM462 Installation Instructions... - Page 20 Gate In Open Position middle of bracket slots Arm Fully Retracted and drill " holes through post. Post Bracket Assembly Mark cross member through middle of gate bracket slots and drill " holes through cross member. Mighty Mule FM462 Installation Instructions...
-
Page 21: Attach Opener Arm
NOTE: The power cable for the Second Opener should be run in PVC conduit under the driveway to protect it from damage due to lawnmowers, heavy equipment, etc. (See illustration on page 6.) NEVER SPLICE opener arm power cables. This will cause performance problems and may damage the opener. Mighty Mule FM462 Installation Instructions... -
Page 22: Install The Closed Position Stop Plates
To further enhance the stability and security of your gate, install a Mighty Mule Automatic Gate Lock [FM143] page 26).If you will be using the Mighty Mule Gate Lock with your gate opener system, the closed position ground stop is required. -
Page 23: Mount The Battery Box And Control Box
Pe de nc e. ia ns Illustration B Mighty Mule FM462 Installation Instructions... -
Page 24: Connecting The Battery
Phillips screw (labeled ANT) from the control box cover. Place one end of the antenna coil over the antenna plug Control Box Cover (antenna wire will fit into groove). Tighten the Phillips screw to secure antenna. Mighty Mule FM462 Installation Instructions... -
Page 25: Connect Opener Power Cables
Wrong For safety reasons the Dual Sense obstruction setting or Stall Force on the Mighty Mule® control board comes from the factory set at MIN (minimum). This setting may need adjustment to overcome the weight and size of the gates. - Page 26 14 VAC SOLAR Make sure the exposed wires do not Low Voltage Wire VAR6 touch each other! from Transformer or Solar Panel ON OFF Mighty Mule FM462 Installation Instructions...
-
Page 27: Set The Closed Position Limit
OPEN LIMIT. This indicates the limits for both arms are programmed in memory. Step 6 Press the transmitter button and allow the gates to fully close to verify that they stop at the desired positions. Repeat Steps 2-5 if correction is needed. Mighty Mule FM462 Installation Instructions... -
Page 28: Adjust The Stall Force Setting
SEC. SFTY. AUTO CLOSE VAR1 EXIT VAR2 CYCLE VAR3 EDGE VAR4 SENSOR COMMON VAR5 LOCK+ LOCK– BATT + BATT – 14 VAC SOLAR VAR6 ON OFF Mighty Mule FM462 Installation Instructions... -
Page 29: Personalize Your Transmitter Setting
Personalize Your Transmitter Setting All GTO transmitters have a standard setting and are ready to operate your Mighty Mule Gate Opener. For your safety and security, we strongly recommend that you replace the factory setting with your own personal setting. -
Page 30: Push-To-Open Installation Instructions
You must use bolts that completely penetrate the post. Drill " holes through the 3 /4 gate cross member as marked. Mount gate bracket using two " x 2 " bolts, washers, and lock nuts. Mighty Mule FM462 Installation Instructions... - Page 31 Note: Must have a transmitter that operates the gate. If not, see Personalize Your Transmitter Setting on page 18. Step 10: Adjust Stall Force Setting (page 17) Step 11: Set Auto Close Time (page 17) Step 12: Personalize Transmitter Settings (page 18) Mighty Mule FM462 Installation Instructions...
-
Page 32: Solar Panel Instructions
Low Voltage Wire from Transformer or Solar NOTE: For multiple panels, wire the panels in Solar Panels connect in PARALLEL parallel as shown in this diagram. BLACK BLACK Mighty Mule FM462 Installation Instructions... -
Page 33: Connecting Accessories And Safety Devices
Shield Gate Opening Sensor Refer to Sensor manual for additional information if needed. Digital Keypad NOTE: Connections are for typical applications. For additional connection options not illustrated here refer to the accessory manual for details. Mighty Mule FM462 Installation Instructions... - Page 34 12 Volt Power (Maximum Current: 100 mA) COM: Common/Negative terminal for accessory power source. LOCK +: Power source for GTO/Mighty Mule accessories, i.e. Gate Opening Sensor [FM138]. Lock Outputs LOCK +: Positive terminal to connect Automatic Gate Lock [FM143].
-
Page 35: Troubleshooting Guide
3. IF THE GATE STOPS AND REVERSES DIRECTION 1. Check the gate for binding or hinge damage. 2. Adjust stall force if necessary. 3. Reprogram closed position limits. 4. Check the position of the mounting brackets and readjust if necessary. Mighty Mule FM462 Installation Instructions... -
Page 36: Gate And Opener Maintenance
Replace battery every 1–2 years. Warranty Repair If your Mighty Mule Gate Opener is not operating properly, please follow the steps below: 1. First use the procedures found in the Visual and Audible Diagnostic Indicators section (page 24). -
Page 37: Accessories
Pin Lock (FM133) The Pin Lock substitutes for the clevis pin at the front end of the Mighty Mule gate openers. Helps prevent theft of the opener from the gate. Single Button Transmitter (FM135) The Mighty Mule entry transmitter, with adjustable settings, is standard equipment with all Mighty Mule systems. - Page 38 (Eastern Time) A.M. P.M. For technical service Call toll free: 1-800-543-1236 The Technical Service Department is open Monday – Friday 8:00 – 7:00 (Eastern Time) A.M. P.M. 3121 Hartsfield Road • Tallahassee, Florida, USA 32303 www.mightymule.com Mighty Mule FM462 Installation Instructions...
